Mavic Mini 2 Water Landing Leg, Waterproof Landing Gear Training Kit Extenders Floating Holder for DJI Mini 2/Mavic Mini


Mavic Mini 2 Water Landing Leg, Waterproof Landing Gear Training Kit Extenders Floating Holder for DJI Mini 2/Mavic Mini




Features
  • Water landing gear kits compatible with DJI Mini 2/Mavic Mini drone, effectively increasing the distance between the drone and the ground by 45mm.
  • The buoyancy bar protects the drone body safety when your Mini 2 / Mavic Mini is landing or take-off.You can shooting videos on the water and making your flight more fun, preventing the drone from accidentally falling into the water.
  • It can also be used as a height-increasing landing gear, effectively improving the ability of the drone to adapt to the ground environment during take-off and landing, and avoid ground debris from soiling the fuselage or damaging the gimbal.
  • The installation is simple and quick, it will not affect the normal use of the sensor and will not bring too much load to the body.
  • Please be careful not use it with the wind speed too fast to avoid accidents. Before using it on the water, you need to test the balance after installation and do not go to places with waves, otherwise there is a danger of overturning.
  • Mavic Mini 2 Water Landing Leg,TOMAT Damping Landing Gear Training Kit Floating Holder for DJI Mini 2/MINI SE/Mavic Mini Accessories





    Features
  • 【Applicable models】This Water Landing Gear is suitable for DJI Mini 2/Mavic Mini/MINI SE
  • 【Water Landing】Use Water Landing Gear to make your Mini 2 / Mavic Mini on the water Landing or taking off,Take a video on the water and let you have more fun flying (before using it on the water, make sure not to go where there are waves, otherwise there is a danger of overturning.)
  • 【Effective protection】The water landing gear can also be used as a landing gear, which can increase the distance between the drone and the ground by 45mm, effectively improving the ability of the drone to adapt to the ground environment during take-off and landing.It can avoid damage to the drone due to collision with the ground during take-off or landing
  • 【Non-destructive installation】The installation and disassembly are simple, no additional tools are needed, and the drone will not be damaged. First, fix the upper bracket above the drone, and fix the lower bracket below the drone, then align and tighten with the attached screws, and then Put the buoyancy rod into the lower bracket and adjust the position
  • 【Excellent material】Made of high-quality ABS material and foam, it has the characteristics of durability and strong bearing capacity, and the lightweight design will not burden the flight. Packing list: upper part of the fixing frame*1, lower part of the fixing frame*1, M3 screws*2, buoyancy rod*2
  • Globact Drone Landing Gear for DJI Mavic Mini/Mavic Mini 2 Drone Landing Float Water Landing Leg Landing Gear Extenders Kit





    Features
  • Landing gear kits compatible for DJI Mini 2/Mavic Mini drone, it can effectively increase to 45mm, and can still take off and land in an uneven environment.
  • Buoyancy Stick protect your Mini 2/Mavic Mini when it lands / takes off on water,shooting video over the water and makes you flying have more fun(The Mavic Mini waterproof landing gear don't influence the sensor)
  • Effectively improve the drone's ability to adapt to the ground environment during take-off and landing, avoid ground debris that can contaminate the drone or damage the lens filter or the gimbal.
  • Please Note:Because the Mini 2/Mavic Mini is very light, pay attention to the wind speed when using it to prevent the Mavic Mini from being blown away.Before you want to use it on water, you need to test the balance after installation.Don't go to have wave of water of place, otherwise there will be danger of turning over.
  • Note: When the Mini 2/Mavic Mini electricity was lower 50%, Please carefully flying with landing gear;When The electricity was lower 30%, please don't use Mavic Mini waterproof landing leg on Your Mini 2/Mavic Mini drone.
  • Mavic mini/ Mini 2/Mini SE Water Landing Gear Float Expansion Kit Extender Leg Landing On Water for DJI Mini 2/Mavic Mini /Mini SE Accessories





    Features
  • The water landing gear fits to DJI Mini 2/Mini SE and Mavic Mini.
  • Buoyant rods can be installed to allow the Mavic Mini/DJI mini 2 to take off and land on the water,it can allow let you Take a video on the water or sea.
  • Lightweight, portable, easy to carry and install, It can use your DJI mini 2/Mavic Mini flying on the river and lakes,no worry about your drone sinking.
  • Highly Stability,it can effectively increase to 45mm, Allows Smoother Landings, and allows for a smooth landing on a variety of unstable surfaces.
  • Note :Don't go to have wave of water of place, otherwise there will be danger of turning over, to fly in calm water place.
  • KYUNRAIN BRO Mavic Mini 2 Water Landing Leg, Damping Landing Gear Training Kit for DJI Mini 2 Accessories,with Extra Lens and Gimbal Protection for Mavic Mini 2





    Features
  • 【Professional design】This Water Landing Gear is designed for Mavic mini specially. Fits the the body perfectly, unique arched design.The Mavic Mini waterproof landing gear don't influence the sensor.Water landing gear kits can also be used as height-increasing landing gear,Shock absorption, no damage to the body.
  • 【Effective protection】The drone landing gear raise the drone up to 45mm above the dirt, sand, grass, provide good protection for drone camera and gimbal .You can shoot videos on the water and making your flight more fun, preventing the drone from accidentally falling into the water. It also plays a role in increasing the distance from the dirty and uneven ground.
  • 【Portable】 Made of high-quality ABS material and foam, strong bearing capacity, Lightweight, portable, only 36g,it will not bring too much load to the Mavic mini.Easy to mount and disassemble, no tools assembly.
  • 【Value meal】3 Sets Lens Screen Protector perfectly protect the Mavic Mini lens screen from scratches, dust, oil, fingerprints and normal signs of wear. Gimbal Protector Cover prevent gimbal and camera from waggling, collision and keep them stay away from dust during transportation and storage. It provides protection during transportation, do not use for flying.
  • 【After-sale service】 If you encountered any problems of product quality, please email us .We will try our best to resolve the issues in 24H.
  • Mavic Mini 2 Water Landing Leg, SUCU Waterproof Landing Gear Training Kit Extenders Floating Holder,Damping Landing Gear Training Kit DJI Mini 2/Mavic Mini





    Features
  • PERFECT COMPATIBILITY -- This water landing leg kit is perfectly compatible with the DJI Mavic Mini, 1:1 fit design, just to fit the body of Mavic Mini, beautiful, arched bridge shape, strong and durable.
  • MULTIFUNCTIONAL -- Not only can be used as landing gear, allowing the drone to take off and land on calm water, but also be used as a buoyancy stick. Greatly improve safety, complete the water screen and picture shooting, easy to float, does not affect the sensor.
  • EXCELLENT DESIGN -- This drone landing float accessories effectively increases by 45mm, avoiding ground debris that can contaminate the drone or damage the gimbal. Allowing your drone to better adapt to the ground and water environment, and the extended landing gear allows smooth landings and even on various unstable surfaces.
  • EASY TO USE -- Easy to install and remove, no additional tools, don't worry about damaging the body. Even beginners can use it quickly and can be quickly released or installed with the included screw kit such as sports cameras and LED lights, etc.
  • TIPS -- Lightweight and easy to carry, can be installed buoyancy sticks, so that the Mavic Mini in the calm water take-off and land on, pay attention, not to the surface of the waves, otherwise, there will be a risk of tipping.
  • FVW Mavic Mini 2 Water Landing Leg, Damping Landing Gear Training Kit Floating Holder for DJI Mini 2 / Mavic Mini Drone Accessories





    Features
  • 【Light-weight & Good protection】This water landing leg is made of foam and plastic.Not only light weight(will not influence the drone flying),but also raise the drone up to 45mm above the dirt, sand, grass, provide good protection for drone camera and gimbal.
  • 【No Tools Assembly】Easy to mount and disassemble, no tools assembly.
  • 【Buoyancy Stick 】Buoyancy Stick allows your Mavic Mini lands / takes off on water,shooting video over the water and makes you flying have more fun(The Mavic Mini waterproof landing gear don't influence the sensor).
  • 【Please Note】Because the Mavic Mini is very light, pay attention to the wind speed when using it to prevent the Mavic Mini from being blown away.Before you want to use it on water, you need to test the balance after installation.Don't go to have wave of water of place, otherwise there will be danger of turning over.
  • 【Packing List】1*Mavic Mini Waterproof Landing Gear.DO NOT include the Drone
  • Mavic Mini/Mini 2 Drone Float Landing Gear,Water Extender Landing Leg Compatible with DJI Mavic Mini/Mini 2





    Features
  • WATER LANDING GEAR for DJI MAVIC MINI/MINI 2 - Specially used for DJI Mavic Mini/Mini 2, with precise dimensions and perfect fit.It can be used as an ordinary landing gear, and can also be used as a buoyancy rod to land on the water(When landing on the water, please make sure that it is on a calm water surface to prevent the drone from overturning by big waves, which may damage the drone).
  • PROVIDE PROTECTION - This water landing gear increases the distance between the drone and the horizontal to 4.5cm, which can effectively prevent debris or dirt on the ground from obstructing or contaminating the drone during take-off and landing, and preventing damage to the drone due to collision with the ground.
  • EASY TO INSTALLATION - Non-destructive installation design, installation and removal are very simple. No other tools are needed to install the water landing gear,which is convenient and quick.
  • HIGH QUALITY MATERIAL - Made of high-quality ABS material and foam, it has the characteristics of durability and strong bearing capacity.The net weight is only 36g,does not affect the smooth flight of your mavic mini/mavic mini 2.
  • NOTE - When the Mini 2/Mavic Mini electricity was lower 50%, Please carefully flying with landing gear;When The electricity was lower 30%, please don't use Mavic Mini waterproof landing leg on Your Mini 2/Mavic Mini drone.
  • DJI Mini 2 Fly More Combo – Ultralight Foldable Drone, 3-Axis Gimbal with 4K Camera, 12MP Photos, 31 Mins Flight Time, OcuSync 2.0 10km HD Video Transmission, QuickShots, Gray





    Features
  • 【PACK LIGHT, FLY FREE】: at less than 249 g, it weighs about as much as an apple and fits in the palm of your hand. compact and convenient, this small drone is your ideal travel companion, transforming how you capture your favorite memories.
  • 【OCUSYNC 2.0 VIDEO TRANSMISSION】: mini 2 supports up to 10km of hd video transmission and has excellent anti-interference capabilities, giving you the ability to fly farther and see clearer.
  • 【POWERFUL PERFORMANCE】: with a max battery life of 31 minutes, dji mini 2 grants more than enough time to compose the perfect shot. mini 2 can resist level 5 winds and take off at a max altitude of 4,000 meters, so your footage is stable even when flying along a windy coastline or high above an alpine forest.
  • 【4X ZOOM】: there’s no need to get so close for your dream shot. 4x digital zoom makes it safer and more convenient when transitioning between shots of varying distance and composition.
  • 【QUICKSHOTS】: with just a few taps, dji mini 2 automatically records and shoots professional-level videos to share directly on social media. whether you’re a beginner or a more experienced flyer, the dji fly app helps you produce impressive results complete with soundtracks and filters.
  • 【COMPATIBILITY】: the dji fly app requires ios v10.0, android v6.0, or above. compatible devices include: iphone 11 pro max, 11 pro, 11, xs max, xs, xr, x, 8 plus, 8, 7 plus, 7, 6s plus, 6s, 6 plus, 6, samsung galaxy s20, s10+, s10, s9+, s9, s8+, s8, s7 edge, s7, s6, note10+, note9, note8, huawei p30 pro, p30, p20, p10, mate 30 pro, nova 5, nova 4, nova 3e, nova 2, honor 8x, 10, 9, 20 pro, magic 2, mi 10, mi 8, mix 2s, mix 2, redmi note 5, oppo find x, r15, vivo nex, x27, x21, x20a, oneplus 7, 6t, 5, pixel 4, 3 xl, 2 xl, 2, lg v20, lg g6, sony xpeial 1.
  • KINBON Drone Landing Pads, Waterproof 30'' Universal Landing Pad Fast-fold Double Sided Quadcopter Landing Pads for RC Drones Helicopter DJI Spark Mavic Pro Phantom 2/3/4 Pro Inspire 2/1 3DR Solo





    Features
  • 【Waterproof Premium Material】Made of high quality waterproof Nylon material with lightweight, Open Size: 30''/75cm, Fold Size: 11''/28cm. Double sided high-precision printing, and sun protection, not easy to fade. Very waterproof and durable for use, easy to fold and fast-fold.
  • 【Universal Drone Landing Pad】The 30" universal drone landing pad with double sided, which is perfectly fit for RC Drones Helicopter, PVB Drones, DJI Mavic Pro Phantom 2/3/4/ Pro, DJI Inspire 2/1, 3DR Solo drone, Gopro Kama, Antel Robotic X-star, Parrot drone, and more.
  • 【8 Reflective Straps & 3 Land Nails】 With rich accessories:1* landing pad + 1*carring bag + 8*Reflective strips + 3*landing nails. 8 reflective strips are used for night flying, pasting them to the outer of the printing circle.They will provide clear location for drone in darkness. 3 land nails fixed to the landing pad on the ground firmly, helping the landing pad work perfectly in windy environments.
  • 【Fast-Fold & Portable】Fast-fold and portable landing pad for mavic pro . With elastic material of one side, easy to carry and store it into the bag with zipper. Double sided and double color with blue and orange 2 colors, are applied for different occasions. And also highlight the clear location of the landing place. ( Note: Specific folding ways, please see the last picture. )
  • 【Compatible for wide range of Drones】Suitable for all drone models.NOTE: Please Un-fold in an Open Space and Keep Away From Your Face